In response to a question:

Dear @patternfreak

I too have experienced being stuck on 'E". This seems to happen most when the film take-up spool fails to properly grab and hold on to the film leader after the rear cover has been re-attached. Simply remove the rear cover again and re-thread the film leader on to the take-up spool and making sure to wind the film advance dial a few times to make sure the take-up spool has accepted the film leader. There's enough film in the film canister to allow for extra winding of the film when loading a camera.

Also, take a close look at the top edge of the rear cover. There should be a little plastic stem on the left side of the cover - it sticks out about a quarter of an inch. That stem fits into a hole on the back of the camera. When the rear cover is removed (and the stem is out of the hole) the film counter resets itself to "E". Once the rear cover is re-attached to the camera and the stem is seated correctly in the hole, it enables the film counter to start counting when you wind the film advance knob on top of the camera. If the stem is missing the film will advance....but the counter will always remain on "E".

Good Luck

Randy (Dred242 and BokehImage)

The Sprocket Rocket

My Analog Project 2012 kicked off in the month of January with the Lomography Sprocket Rocket. The Sprocket Rocket is a 35mm film camera designed to shoot panoramic sprocket hole images. The camera is very slick looking with a throw-back retro design that looks like the Falcon Miniature from decades past. The Sprocket Rocket does great in bright sunlight with any color film - I can't wait to venture out at night with a roll of 800 speed film to see how it does. I haven't tried the double exposure feature which is done by winding the film backwards with the left-side top-mounted roll-back knob. I will admit that I've never been successful with double exposures.....but I'm willing to give it a try. The Sprocket Rocket is a wonderful and fun "not so toy" camera.